Download Expert-50

CLOCK OUTPUTS
The Expert-50 has four timers for controlling various devices using the
real-time clock. Each timer has 24 cycles defined using start and stop
times or start and running times.
Start Time / Stop Time Definition:
ON
Start Time = 8:00
Stop Time = 9:30
Start Time / Running Time Definition:
ON
Running Time = 90 min; 30 sec
Start Time = 8:00
Adjusting Clock Outputs
Each clock output has up to 24 clock cycles. Start and stop times can
be adjusted to any clock time. Running times range from 0 hours, 0
minutes, 0 seconds to 15 hours, 59 minutes, 59 seconds.
Set the function to SETTINGS –
1.Start:00:00A
OUTPUTS using the menu select
Stop: 00:00A
buttons. The start and stop
temperatures for Heater 8 are
displayed and the Heater 8 LED on the right flashes.
Use the output select buttons to one of the four clock outputs. The
corresponding LED on the right of the front panel flashes.
Expert-50 rev.10
47