Download User Manual

6.0 Operation
6.0 Operation
IMPORTANT: DO NOT ATTEMPT TO OPERATE THE CUTTER UNTIL
YOU HAVE THOROUGHLY READ AND UNDERSTAND ALL OF THE FOLLOWING
INSTRUCTIONS. CALL YOUR AUTHORIZED CHALLENGE DEALER IF YOU STILL HAVE ANY
QUESTIONS.
Cutting Lever Handle
Cutting Lever
Clamp Handle
Knife Latch
Lever
Backgauge
Position Display
Front
Shield
Backgauge
Hand Crank
Figure 3 – Machine Controls
6.1 Main Power
Power is enabled when the A/C adapter is plugged in and when the connector is plugged into the
socket at the back, left table (Figure 4). The display and line light are switched on at this time.
Figure 4 – Connect Power to the Machine
10