Download Blue&Me

604_31_828 BeM MiTo Gb
13-05-2008
15:56
Pagina 70
TROUBLESHOOTING
70
Problem
Display screen shows: PAIR. FAILED
Or the system says “Bluetooth pairing
timed out. Please try again later.”
Display screen shows:
PRIVATE NUMBER
Display screen shows: ONLY AT REST
Or the system says:
“This function is only available
when the vehicle is stationary”
Probable Cause
Possible Solution
After three minutes, each attempt to
enter the PIN number fails since
pairing timed out
Retry the pairing procedure. During the
PIN entering step, verify that the PIN
number you are entering on the mobile
phone is the same number that is shown
on the instrument panel display
SETTING FUNCTIONS PAIRING YOUR MOBILE PHONE
❍ The caller is not recognized as a name
stored in the phonebook,
and the paired mobile phone does not
have a called ID feature
❍ The caller has blocked caller ID
to prevent the system from
displaying the caller’s name
and/or phone number
Enter a contact in your mobile
phonebook for the incoming call,
and then download your phonebook/
contact again
Even occasional short viewings of the
car display may be hazardous if your
attention has been diverted away from
your driving tasks. Certain Blue&Me™
functions, which require the user to give
attention to the car display, are only
available when the car is stopped
Stop your car and attempt to perform the
function again manually,
or continue driving and perform the
function using the voice recognition
system
In this case, nothing can be done and
the message will always appear