Download 58 Building an Application
Transcript
Chapter 58 Building an Application When you run the Phone system, start the program from two (or more) shell tools (on UNIX). Each instance of the program will then print: My Pid: 2311 Connect me to: You should answer these questions in such a way that a ring is formed by the programs. When the initialization is completed for a program it prints: ******** Welcome to SDT Phone System ******** phone -> The program is now ready to receive lines printed on the keyboard and messages sent from other programs. A Display signal received from another program is printed as follows: display -> the line received in Display signal Where to Find the Example All files concerning this example may be found in the directory: <installation directory>/sdt/examples/phone Use these files if you only want to look at the source files and if you are using a Sun workstation you could try the executing versions of the program. Otherwise you should copy the files to one of your own directories. Please be sure not to change the original files. In the directory you will find the following files: 2734 File name Purpose Phone.sdt The system file Phone.ssy Represents the SDL system PhoneBl.sbk Represents the SDL block PhonePr.spr Represents the SDL process phone.pr The generated PR file after GR to PR phone.c The generated C file after C code generation phone.ifc The generated .ifc file ,um-st1 Telelogic Tau 4.5 User’s Manual July 2003