Download LX Zeus - Squarespace

LX Navigation d.o.o.
LX Zeus
September 11th 2012
4.6.4 Task Start, Restart and Next TP
Thre are two methodes of staring a task. Manual
start is posible after using of Next TP function. Next TP
command will change over to next TP every time when
activated, doesn’t matter if the glider is in the sector
or not.
A more sophistic start method is automatic solution.
In that case the pilot should ARM automatic start.
Use ARM command which is offred after press on
TSK button. Activation of ARM and also deactivation
are clearly shown on the display. Disarmed means
canceleratin of ARM status.
4.6.4.1 Task Restart function
After task has been started (method doesn’t matter)
a task restart can be executed at any time.
Use Restart button of TSK menu.
Restart button will become active after task start.
After restart all task statistics data will be zeroed and
ARM status will become active, which makes
possible to provide next automatic start.
4.6.4.2 Over Turn point
Change over to next turn point may be automatic
or manual. Automatic change over will happen
when Auto next of individual zone is set to auto.
Default setting for Auto next:
-R1below 10 km Auto next active (automatic change over)
-R1 above 10 km manual change over necessary
Use menu Zone of particular turn point for adjustment.
- 33 -