Download Quick guide Technical parameters You partner for network analysis

KBR multimess 4F96
Interface
(option)
Technical data multimess 4F96
Bus
RS485 for connection to the energy bus;
max. 32 devices,
Baud rate
38400
Addressing
Can be addressed up to address 9999;
automatically via software or manually on the
device
LAN
IEEE 802.3
speed
10 Mbit / 100 Mbit
Connection
IEEE 802,3, 10 base-T/10 base-Tx, cable CAT5
9.7 Electrical connection
Connection elements
Screw-type terminal
Permissible cross section
of the connection lines
2.5 mm2
Measuring
Fuse protection
voltage inputs
Max. 6 A
Measuring
current
inputs
Fuse protection
NONE!!! Always short-circuit current transformer
terminals k and l prior to opening the circuit!
Input
Fuse protection
Max. 6 A
Relay output
Fuse protection
Max 2A medium time-lag
BUS
connection
Connection material For proper operation, please only use
shielded twisted-pair cables;
e.g. I-Y-St-Y 2x2x0.8
Pulse output
Connection and
cables
Ensure proper polarity!
Transformer
connection
Connections
See connection chart
BUS
connection
Pins for BUS
connection via
RS485
Terminal 90 (⊥)
Terminal 91 (A)
Terminal 92 (B)
Control
voltage
26
EDEKZA0019_4111-1_DE_GB_ 400
For proper operation, please only use
shielded twisted-pair cables;
e.g. I-Y-St-Y 2x2x0.8
Rev. 4.00