Download UNDERFLOOR HEATING/COOLING

10.3
REHAU heating system
for flexible sports floors
connected to pipe
manifold
- Quick installation
- Comfortably temperature-controlled floor surface
- Energy-saving due to a high level
of radiative energy
- no upsetting of dust
- minimal air movement
- Floor is not compromised by pipe
attachment method
- decoupling means no reduction
in flexible properties of the floor
- minimal investment costs in comparison to other heating systems
components
- REHAU insulation panel, pre-cut
- REHAU RAIlFIx rail
- REHAU retaining pins
- REHAU pipe manifold
REHAU retaining pins
REHAU installation panel, pre-cut
Illustration 10-23: REHAU retaining pins
Illustration 10-25: REHAU insulation
panel, pre-cut
The specially shaped tips of the
REHAU retaining pins make for
firm seating of the REHAU RAUFIx
rail on the REHAU insulation panel.
The perforated floor panel of the
REHAU RAUFIx rail receives the
REHAU retaining pins.
The insulation panel consists of
CFC-free, PUR hard foam which
has a diffusion-proof coating (aluminium laminated) on both sides.
It falls in thermal conductivity
category 05 with a characteristic
Flexible floor heating makes planning and calculation much more
complex.
Cooperation between the architect,
planner, sports hall floor installer
and operator is vital for handling
this added complexity. Planning
SPECIAl
APPlICATIonS
REHAU RAUfIx rail
Illustration 10-26: REHAU RAILFIX rail
Pipe dimensions
- RAUTHERm S 5 x .3 mm
An installation pipe spacing of 10
cm and multiples thereof are possible with the REHAU RAIlFIx rail.
It is used as a precise pipe spacer.
REHAU pipe manifold
The REHAU pipe manifolds are built
using RAUTHERm FW pipe 40 x
3.7 mm and REHAU fittings with
the compression sleeve connection technology. They are used for
the connection of the RAUTHERm
S pipes 5 x .3 mm. Assembly
occurs at the construction site
based on detailed drawings in accordance with the construction site
conditions.
Accessories
- REHAU manifold
- REHAU manifold cabinet
Illustration 10-24: REHAU sports floor system
186
value of 0.05 W/mK according
to dIn 4108.The panel is normally
inflammable according to dIn
410, material class B.
The REHAU insulation panel is
supplied precut. The grid dimensions of the floor must therefore
be made known in the planning
phase. This eliminates time-consuming, laborious and imprecise
cutting at the construction site.