Download UNDERFLOOR HEATING/COOLING

ConCRETE CoRE
TEmPERInG
REHAU protective sleeve
REHAU compressed-air pipe cap
REHAU manometer
REHAU compressed-air plug
nipple
Illustration 9-19: REHAU Protective sleeve
Illustration 9-20: REHAU Compressed-air
pipe cap
Illustration 9-21: REHAU Manometer
Illustration 9-22: REHAU Compressed-air
plug nipple
The REHAU protective sleeve made
of polyethylene is used for expansion joints. It can also be used for
leading connection lines through
from the concrete ceiling to above
the ceiling.
The REHAU compressed-air pipe
cap is used for pressure tests at
the construction site and is assembled to the REHAU BKT modules with the REHAU compression
sleeve joint at the factory. With the
REHAU concrete core temperature
control installed on site, it is assembled by the customer.
The REHAU manometer is used
in conjunction with the REHAU
compressed-air plug nipple during
pressure test at the construction
site. The pressure tests are to be
performed before concreting and
after inspection of the lower boarding level at the construction site.
The REHAU compressed-air plug
nipple is used in conjunction with
the REHAU manometer during
pressure test at the construction
site. The pressure tests are to be
performed before concreting and
after inspection of the lower boarding level at the construction site.
material
Polypropylene
material
Brass
material
Steel
material
Brass
Pipe diameter
17 x .0 /
0 x .0
Pipe diameter
17 x .0 /
0 x .0
length
40 mm
length
33 mm
Connection
R ¼”
Connection
Rp ¼”
length
1 m (can be
coupled)
length
59/58 mm
Colour
Black
160