Download sensor-e ® com User Manual

sensor-e.com Instruction Manual
2.5.1.1.
Step
1.
2.
Configuration
To open the Instrument Properties dialog box
Action
Comment
Using the mouse, click on the desired
instrument
Click on
instrument
or double-click on the
The Instrument Properties dialog box
appears (refer to Figure 2-6).
Most of the instrument properties are optional and are included for maximum compatibility with all of
button in the Basic tab (Figure 2-6) will reset all options to their
TML’s instruments. The
default values. Notice that only the instrument-specific communication settings appear in this dialog box.
The remaining communication settings are specified on a site-by-site basis. The following section
describes all instrument properties.
2.5.1.2.
Instrument Properties Tabs
Basic Tab
The following figure shows the instrument properties screen Basic tab. Table 2-3 identifies the instrument properties and provides a
brief description of each property.
Figure 2-6: Instrument Properties Dialog Box, Basic Tab
039450000 Rev B
11