Download Euro-2100 - JUTA

© Elcom, s. r. o.
Euro-2100
ECR will delete the assigned function sequence assigned to that key and prints the information on the deleted function (this information
includes programmed key ID number, record
type „01.Key“, info label on function programming and its number „01.Function“ and the
keyword „deleted“). The programming procedure then continues normally.
Printing of the programmed key name
Programming manual
The ECR will print to both receipt and journal
following information on the key: ID number
of the programmed key and record type „01.
Key“, parameter label „Key name“ and current
value assigned function sequence.
Printing the settings for all keys
You can print the setting for all ECR key if you
press (Cheque) key in either step 1 or step
4 of the programming procedure.
The name of the programmed key will be printed if you press (EAN) key during step 1 of The display will show „Keyboard prog.“ label
and the same will be printed to both receipt
the programming procedure.
and journal. For each key, the ECR will print:
The ECR will print to both receipt and journal
following information on the key: ID number - number ID and record type: „01.Key“
of the programmed key and record type „01. - parameter label „Key name“ and the name
Key“, parameter label „Key name“ and current
of the current key
value of that parameter.
- for each function in the current key‘s assigned function sequence will print number
Printing of the programmed key function
and label „1.Fucntion“ and the current value of that function and the programming
The name of the programmed key will be prinof the keys finishes.
ted if you press (EAN) key during step 4 of
the programming procedure.
34