Download User Manual - D-Link

Section 6 - Wi-Fi Hot Spot Mode
Firmware
You can upgrade the irmware of the DIR-505 here. Make sure the irmware you want to use is on the local hard drive of the
computer. Click on Browse to locate the irmware ile to be used for the update. Please check the D-Link support website for
irmware updates at http://support.dlink.com. You can download irmware upgrades to your hard drive from this site.
Firmware Click on Check Now to find out if there is an updated
Upgrade: irmware; if so, download the new irmware to your hard
drive.
After you have downloaded the new firmware, click
Browse to locate the irmware update on your hard drive.
Click Upload to complete the irmware upgrade. Do not
disconnect from the DIR-505 or power your computer or
DIR-505 of during the upgrade process.
You can change the language of the web UI by uploading available
language packs.
Browse: Download a language pack from the D-Link website. After
you have downloaded the new language pack, click Browse
to locate the language pack ile on your hard drive. Click
Upload to complete the language pack upgrade.
D-Link DIR-505 User Manual
128