Download View User Manual

http://DnnModule.com/
Page 6 of 27
4. Quick Start (with setup wizard)
V7.x introduces a new setup wizard to guide you to configure module step by step, we
strongly recommend new user to choose this method, and it will save you a lot of time.
With it, you only need 2 steps to setup Cross Article.
Step 1. Install module.
Step 2. Follow setup wizard to configure module.
4.1 Step 1: Install/Upgrade module
If you already bought Cross Article module, unzip package which you got, you will see
“Cross Article 8.0 Pa(standard).zip” (or “Cross Article 8.0 Pa(enterprise).zip” if you
bought enterprise edition), choose it as install package.
If you want to trial module first, you can download “Cross Article 8.0 trial edition
(unzip me).zip” at http://DnnModule.com/FreeDownload.aspx. Unzip it your will find
“Cross Article 8.0 Pa(trial).zip”.
Click “Host - Extensions - Install extension wizard“ to install module. After installation,
you will see 13 sub modules.
Install via Ftp
The install package size is about 8mb in size. If you have problems uploading by click
“Host - Extensions - Install extension wizard”, there is an alternative installation option
you can use. Please use the following procedure:
1. Upload “Cross Article 7.9 Pa(standard).zip” to Install\Module folder of your site
Copyright © 2015 – DnnModule.com – All Rights Reserved