Download Three Modem Control Methods:

ANYCALL
ARQ
AUTO
BELLS
BROADCAST
CALL
CHANNEL
CLEAR
CONFIG
DATABASE
DATE
DBM
DELETE
DISABLE
TRACE
DISPLAY
= Global and Selective minor command for ALE AnyCall call
= Minor command used with DBM and DTM
= Minor command used with DISABLE and ENABLE
= Minor command used with DISABLE and ENABLE
= Minor command used with DBM and DTM
= Meta command used with <Other Address>
= Minor command used with Meta commands
= Clear ALE inlink state.
= Minor command used with SAVE and LOAD Meta commands.
= Minor command used with SAVE and LOAD Meta commands.
= Minor command used with SET
= Data Binary Message binary mode direct command and Meta command
when used with RETRIES.
= Meta command used with CHANNEL, GROUP, NET Address, OWN
Address, OTHER Address
= Meta command used with ALLCALL, ANYCALL, AUTO, BELLS,
ECHO, GPS, LBT, LP, LQA, MOTD, POLL, SCAN, SOUND, THIS_IS,
= Meta command used with AMD, CHANNEL, HELP, LINKED, KEY,
SELF, MYADDRESS, NET_ADDRESS, OPTIONS, OTHER_ADDRESS,
OWN_ADDRESS
DTM
= Data Terminal Message ASCII mode direct command and Meta
command when used with RETRIES.
DWELL
= Minor command used with SET
ECHO
= Minor command used with DISABLE and ENABLE to enable or disable
Telnet echo of MMI commands
ENABLE
= Meta command used with ALLCALL, ANYCALL, AUTO, BELLS,
ECHO, GPS, LBT, LP, LQA, MOTD, POLL, SCAN, SOUND, THIS_IS,
TRACE
END
= Direct execute command
EXIT
= Direct execute command
FERRORS
= Minor command used with SET
FVOTES
= Minor command used with SET
GLOBAL
= Meta command used with ALLCALL and ANYCALL
GPS
= Minor command used with DISABLE and ENABLE
GROUP
= Minor command used with ADD and DELETE
HELP
= Meta command used alone and with other MMI commands to display
help on the command that follows on the same line. Also a Direct execute
command when used without arguments.
INACTIVITY
= Minor command used with SET
KEY
= Minor command used with SET. Also a direct execute command when
used alone.
KILL
= Direct execute command
LBT
= Listen Before Transmit, minor command used with DISABLE and
ENABLE
LINKED
= Direct execute command
LIST
= Direct execute command
LOAD
= Meta command used with CONFIG and DATABASE
LQA
= Link Quality Analysis
MANUAL
= Direct execute command
MODE
= Minor command used with ARQ and BROADCAST in their use with
DBM and DTM
MOTD
= Message of the Day
MYADDRESS
= Minor command used with SET
NET_ADDRESS
= Minor command used with ADD
OPTIONS
= Minor command used with RESET