Download "user manual"

Chapter 6.
Device Driver
KEY corresponds to the KEY_CODE. If the codes match and CMD = TRUE,
then the output Q for a cycle is set to TRUE.
The following example shows the application of IRTRANS_RCV_1:
In this example, the receive data bufer to IRTRANS_DECODE is passed.
The decoder determines from the valid data packets String DEV and KEY
and
passes
them
with
CMD
to
IRTRANS_RCV_1 .
IRTRANS_RCV_1 or alternatively IRTRANS_RCV_4 and IRTRANS_RCV_ checks
whether DEV and KEY match and then switches the output Q for a cycle to
TRUE. in the example a DRIVER_1 is controlled which enables the remote
control to switch the output with each received log.
If multiple Key Codes are to be evaluated alternatively the modules IRTRANS_RCV_4 or IRTRANS_RCV_8 can be used or more of these modules
can be used in parallel mode.
38
Version 1.21