Download Configuration - Avaya Support

System Log Messages
Message Code
Message
Meaning
0128
Previous call not terminated or
multiple start call on channel
%d
A new call has been declared on a
channel; but the previous call has not
been terminated. Internal debug error
only; should not occur in production
software.
0129
Received unknown event 0x%d
The specified event was received from a
DSP, but is not defined.
0130
Recursive execution of state
machine (%s)
Internal debug error only, should not
occur in production software.
0131
Request for annunciator %d in
failed/active mode
A request to use the specified
annunciator was received when the
annunciator was already in use or was
not usable due to a previously reported
failure.
0132
Request for channel %d on
failed DSP node
A request was received to access a
channel on a DSP that had previously
failed.
0133
System database updated
Database updated.
0134
System time has been reset
Database updated.
0135
Timer lost, source process %d
tag 0X018X, operation %s
Memory allocation error in the Timer
process.
0136
Warm restart requested but
network device not configured
A system re-initialization was started, but
when the system came up the network
boards had reset. This could occur during
the re-initialization due to board
installation problems.
0139
Operator database updated
Database updated.
0141
Network database updated
Database updated.
0142
Possible %d CDR(s) Lost For
Channel %d
Indicates an internal queuing problem
has occurred and CDRs/CODRs may
have been lost. Will only occur under an
extreme load condition.
0143
Auxiliary Channel %s
Unavailable
Indicates that channels on the FDAPI
have gone out of service.
0144
Auxiliary Channel %s Available
Indicates that channels on the FDAPI
have come into service.
168 Meeting Exchange 5.0 Service Pack 2 Configuration Guide for the S6X00 Servers