Download Functions for Enhancing Projection
Transcript
List of Functions 54 Sub Menu Function Operation Direct Power On: You can set whether or not (On/Off) to enable Direct Power On. When it is set to On and the power cable is plugged in, be aware that the projector turns on automatically in case such as a power outage is restored. Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried out. Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a range of one to 30 minutes. Lens Cover Timer: When set to On, this turns off the power automatically 30 minutes after the A/V mute slide is closed. Lens Cover Timer is set to On at the time of purchase. High Altitude Mode: Set to On when using the projector above an altitude of 1500 m. Standby Mode Set to Communication On when the projector's status is to be monitored and controlled from the computer via USB communication, even when the projector is in standby mode. s p.88 USB Type B Set s Set Set Link 21L Set to On when the projector's status is to be monitored and controlled from the computer via USB communication. s p.88 Language You can set the language for message displays. Reset You can reset Display*1 and Operation*2 from the Extended menu to their default settings. To return all menu items to their default settings, see s p.56 to USB Display when the projector and a computer are connected by a USB cable and computer images are projected. p.18 to Wireless Mouse when the mouse pointer is to be operated by the Remote Control. s p.34 to Page Up/Down when paging operation is to be performed with the Remote Control. s p.36 *1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed. You can make changes after setting User's Logo Protect to Off. s p.37 *2 Except for High Altitude Mode.