Download User Manual

GearWagon™ 125 Sport Performance Trailer
WARNINGS
Failure to adhere to these recommendations may result in potential hazards from improper operation, including property damage and bodily injury.
• Keep children away. Be sure children are kept a safe distance from the trailer operating area.
• Never sit, stand, or ride on the trailer (people or pets). Serious injury or death could occur.
• Whenever possible, park the trailer on a flat, level, paved surface and chock both tires to keep the
trailer from accidently moving.
• When driving do not exceed the speed limit. Braking time can be considerably longer when a vehicle is towing a loaded trailer. Excess speed is a major cause of vehicle-trailer accidents.
• Make sure the coupler is secured properly to the hitch ball. If not secured properly, the ball could
come loose while the trailer is in motion, possibly causing property damage, SERIOUS PERSONAL
INJURY, or DEATH.
• Tighten wheel lug nuts. Failure to properly tighten wheel lug nuts and to check for proper tightness
during travel my result in property damage or serious personal injury.
• Secure lids using elastomer draw latches and pin locks furnished.
• DO NOT EXCEED YOUR VEHICLE’S TOW LIMITS OR TRAILER’S LOAD LIMIT. Refer to your
vehicle’s towing information to learn the capabilities and limits of your vehicle. Refer to GearWagon
125’s weight specifications on page 3 for load details.
GearWagon 125’s Specifications
Coupler
Make Sure That the Trailer Ball is Completely
Engaged in the Coupler Ball
Place coupler over the 2” trailer ball on your vehicle. Raise the
locking lever to allow the coupler to drop fully onto the hitch ball.
Press the locking lever down on the coupler to make sure the
hitch ball is fitting snugly in the coupler. There should be no play
between the hitch ball and the coupler. If there is play, tighten the
adjustment nut until no play is present. If the adjustment nut is too
tight, the handle will not lock.
To adjust coupler to ball, raise the locking lever, push up on the
channel lock and turn nut to tighten or loosen the coupler. Proper
adjustment is obtained when coupler is as tight as possible on
the ball and locking lever can still be opened and closed.
Locking Handle
(Position B)
2" Ball Only Not Included
Locking Handle
(Position A)
2" Trailer
Coupler
Channel Lock
Adjustment Nut
GearWagon 125’s coupler comes with the Handi-Grip handle and Stabilizer swing arm stand with caster for easy maneuverability when uncoupled from the vehicle. The Stabilizer swing arm secures in reclined position for transit. Pull arm away to
release from notched position in order to operate in downward position for trailer support. To adjust swing arm height, simply
adjust arm length by pressing the release latch on the arm.
GW 1125-9/12
––