Download Sartorius Moisture Analyzer

Overview
Specifications
Model
MA150
Dryer functions:
Heating element
Temperature range
Temperature increments
Temperature adjustment
Ceramic/quartz-rod IR heater
40 to 220 °C
Adjustable in 1 °C increments
With YTM03MA/YTM05MA temperature adjustment set
Weighing functions:
Weighing capacity
Readability
Repeatability, typical (%)
External calibration weight
(with an accuracy of at least…)
Sample pan dimensions
Drying parameters:
Heating programs
Drying time
Number of stored programs
Shutoff criteria
150 g
1 mg, 0.01% moisture content
Sample weight 1 to 5 g: 0.2%
Sample weight 5 g and over: 0.05%
100 g (E2)
d 90 mm
Minimum sample weight
Standard; gentle drying
0.1 to 99.9 minutes
20
Fully-automatic, semi-automatic (absolute, percentage),
timer mode (1 + 99.9 min.), manual
Moisture, dry weight, ratio, weight loss, residue (g or g/kg), g/l
(with specification of sample quantity)
0.100 g
Analyzer (hardware):
Dimensions (W + D + H)
Net weight, approx.
Voltage
Frequency
Fuses
Operating temperature range
Power consumption
Built-in interface
Format:
Parity:
Transmission rates:
Handshake:
Digital input:
Digital outputs:
213 + 320 + 181 mm
5.1 kg
230 V or 115 V (depending on model variant), –15% to +10%
48 – 60 Hz
2 (neutral conductor/phase), 6.3 AT, 5 + 20 mm (internal)
+10 … +30 °C
700 VA max.
RS-232C
7 bit ASCII, 1 start bit, 1 or 2 stop bits
odd or even
150 to 19,200 baud
Software or hardware
1, configurable function
4, moisture analysis status
Display of analysis results
50