Download r USER MANUAL - E

Transcript
PANEL CUTOUT
WIRING GUIDELINES
A) Measuring Inputs
NOTE: Any external components (like Zener diodes, etc.) connected between sensor and input
terminals may cause errors in measurement due to
excessive and/or not balanced line resistance or
possible leakage currents.
TC Input
+ 10
_ 9
Shield
+ 10
Fig.3
_ 9
Shield
Fig. 4 THERMOCOUPLE INPUT WIRING
NOTE:
1) Do not run input wires with power cables.
2) For TC wiring use proper compensating cable,
preferably shielded (see Appendix B).
3) Shielded cable should be grounded at one end
only.
GB 3