Download CNC Controller User Manual

Hind Technology Group
6
Hardware Connections ____________________________________________________________
18
6.1 Power Connector____________________________________________________________________
_________________________________________________________________________________
18
6.2 VGA Connector______________________________________________________________________
_________________________________________________________________________________
18
6.3 USB Connector______________________________________________________________________
_________________________________________________________________________________
18
6.4 Servo/Stepper Motor Connectors for X, Y & Z Axis __________________________________
19
6.5 Coolant and Lubrication Connector______________________________________________________
_________________________________________________________________________________
19
6.6 Tower Light Connector ________________________________________________________
20
6.7 E-Stop and Guard Door Connector _______________________________________________
20
6.8 Analog Inputs _______________________________________________________________
21
6.9 RS 232 Connector ____________________________________________________________
21
6.10 Auxiliary Input / Fly by wire ___________________________________________________
21
6.11 Auxiliary Output ____________________________________________________________
21
6.12 Spindle Connector ___________________________________________________________
22
6.13 Spindle RPM Sensor _________________________________________________________
22
6.14 Home Input ________________________________________________________________
22
7
Upgrading/Unlocking the controller _________________________________________________
23
8
Getting Support _________________________________________________________________
8.1.1 Reporting Bugs __________________________________________________________
24
24
9
Detailed Specifications ____________________________________________________________
9.1 Electrical ___________________________________________________________________
9.2 Mechanical data _____________________________________________________________
25
25
25
Warranty ______________________________________________________________________
26
10
CNC Controller V1.0
Document Version 1.3
Page 3 of 26