Download ZIMO sound programmer

6.3... 1 - Add steam blow samples on steam locomotives
The 3 fields "H", "M" and "L" are each speed level. Always samples must be
associated with the "M" fields. The "H" and "L" fields are optional. Other samples
should be used when accelerating so they can be mapped to fields the "H". If the "L"
are mapped to fields samples, then these are played by the decoder during braking.
Is an "H" or "L" field blank samples from the "M" field be used automatically.
A sample is assigned to a field it changes color from gray to green. "H deviating from
the" M "field" and "L" fields are displayed with additional colors.
The associated file is then in the "steam hammers:" fields is displayed. If the last
character in the file name (before the .wav) is a number from 1 to 8, this is
information taken to the umpteenth blow of steam Chuffs per revolution it is and
associated with the sample accordingly. If the file names of the various samples of
steam only in this figure are different (E.g. Dampf_1.wav, Dampf_2.wav,...) then only
the first sample must be associated and that others follow automatically. If a sample
was associated in the square this is replaced by the new. When using the left mouse
button on one of the assignment fields (M1, M2,...) clicked then will be in the "steam
hammers:" fields display the currently assigned samples.
6.3... 2 - Add driving noise for diesel locomotives
 "Start" field: starting sounds of the motor
 Field "Stand": sound of the diesel engine
 "Stop" field: diesel engine
 Field "S-F1": transition of sound on the first speed level
 Box "F1": engine noise in the first speed level
 Box 'F1-S': transition from the first speed level to the sound
 3 more samples are required for each additional level of driving
6.3... 3 - Add upgrade and fan noise for electric locomotives
 "Start" field: upgrading the electric locomotive
 Field "Stand": sound of the electric locomotive
 "Stop" field: teardown of the electric locomotive
 Field "S-F1": running the driving motor fan
 Box "F1": fan noise loop
 Box "F1-S": switch off the driving motor fan
6.3... 4 - Add additional driving noises
Following noise must associate if required, see "User
 Stationary
noise for steam locomotives (also called
"boil") Samples":
 Brake
squeal
9