Download - SatelliteTV4Boats

Ocean TV
Ocean Series Antennas
Setting the Skew Angle
If you have determine the correct skew angle, follow the steps below to adjust the antenna’s
LNB skew angle.
Caution – To avoid bodily injury, be sure to turn off the
antenna and disconnect power to all working components.
SKEW ANGLE
East Coast Australia
OPTUS C1/D3 +30 Degrees
Intelsat 8
+25 Degrees
New Zealand
OPTUS D1 - 60 Degrees
West Coast Australia
OPTUS C1/D3
0 Degrees
All O32 in Australia are set for Optus C1/D3 and in New Zealand Optus D1.
1. Turn off the antenna and disconnect power to all wired components.
2. Using the screwdriver, remove the screws securing the radome. Then remove and set
it aside in a safe place.
3. Locate the LNB assembly on the back of the antenna reflector.
Reflector
LNB
Figure A-2 The Back of the Reflector
OCEAN TV
24
www.oceantv.com.au