Download installation

User Manual for POWERLINE 31 series power supply units
Check the contents of the packaging. The packaging should contain the following:
•
power supply unit,
•
1 RS 232 communication cable,
•
user manual,
•
warranty card.
ASSEMBLY
•
When selecting the place of installation, consider the weight of the device:
NOTE! The user is responsible for selecting the place of
installation and ensuring the appropriate operating conditions
for the equipment.
•
It is recommended to install the UPS unit in a separate room (due to the fact
that the unit emits a uniform sound during operation, and also because such a
location provides protection against access by unauthorised persons);
•
The equipment should not be exposed to extremes of temperature (the optimal
temperature is 18 ÷ 25ºC) due to the fact that this may shorten the life of
batteries;
•
The equipment should not be installed in rooms that are: dusty, have a caustic
or explosive atmosphere, or are very humid (under 90% without condensation);
•
If the equipment is to be installed on a roof, the load bearing capacity of the roof
should be taken into consideration;
•
The surface on which the equipment is placed cannot give in under its weight;
•
Appropriate cooling conditions must be ensured for the UPS to work properly.
For this reason, the ventilation openings of the UPS must be uncovered at all
times;
•
It is recommended to leave service access to the equipment (1 m).
For the necessary data, see the table of technical parameters.
NOTE! It is forbidden to install the device near flammable
materials!
2010/01/25
www.ever.eu
10