Download BVA-350 - Auto Meter
Transcript
ABOUT TABLE OF CONTENTS From the main menu scroll down to the last selection. VOLT METER SETUP DOWNLOAD >ABOUT BVA-350 VERSION 2.0 DATE 07/15/2003 COPYRIGHT 1999 Note: The down arrow is no longer displayed. ABOUT is the last menu item. The up arrow indicates previous menu selections. Press (Y Enter) and the version will be displayed. VOLTAGE DROP TEST ERROR MESSAGES One of the following may appear during any drop test sequence. Correct the situation before continuing. ERROR: LARGE LEADS NOT CONNECTED ‘Y’ TO CONTINUE 26 ERROR: BAD CONNECTION ON LARGE LEADS ‘Y’ TO CONTINUE ERROR: SMALL LEADS REVERSED ‘Y’ TO CONTINUE ERROR: SMALL LEADS NOT CONNECTED ‘Y’ TO CONTINUE ERROR: CHECK LARGE RED LEAD ‘Y’ TO CONTINUE ERROR: CHECK LARGE BLACK LEAD ‘Y’ TO CONTINUE ERROR: TURN OFF ENGINE AND ACCESSORIES ‘Y’ TO CONTINUE ERROR: ELECT. SHORT OR ACCESSORY DRAW ‘Y’ TO CONTINUE System noise indicates some device is turned on. Correct by turning vehicle loads off before continuing. Check Tester connections and make sure vehicle loads are off. Page Specifications--------------------------------------------------------2 Safety------------------------------------------------------------------4 Cause of Battery Failure------------------------------------------4 Inspection and Visual Check-------------------------------------5 Controls and Functions--------------------------------------------6 Maintenance---------------------------------------------------------7 Clamp Replacement-----------------------------------------------7 Internal Battery Replacement------------------------------------7 Test Sections 1. Hook Up---------------------------------------------------------8 2. Battery Preliminary Check----------------------------------9 3. Battery Load Test--------------------------------------- 10 -11 4. Starter Draw Test---------------------------------------12 -13 5. Alternator Test-------------------------------------------14 -15 Alternator Test Results------------------------------------- 16 6. Voltage Drop Test---------------------------------------17-18 7. Other Menu Items Review Tests-------------------------------------------- 19 Optional Printer with Carrying Case--------------- 19 Printing Test Results---------------------------------- 20 Voltmeter------------------------------------------------- 21 Setup------------------------------------------------------ 22 PC Interface--------------------------------------------- 23 Using Window------------------------------------------ 23 Download Test Information-------------------------- 24 Capturing Text into Microsoft Excel---------------- 25 About------------------------------------------------------ 26 Error Messages--------------------------------------------------- 26 Warranty Information--------------------------------------------- 27 Contact Information---------------------------------------------- 28 Note: The BVA-350 performs a preliminary check, load tests 6 volt and 12 volt batteries and tests 12 Volt and 24 Volt starting and charging systems. The following examples illustrated are for a 12 Volt system. The BVA-350 automatically identifies the appropriate voltage and displays the menu selection and instructions needed for that system.