Download USER MANUAL INSTALLATION INSTRUCTIONS
Transcript
SENSORS CONNECTION Sensors sense the temperatures when the cylinder is connected to heating applications, and transfer the reading to the controllers, such as 3 way valve, pumps and other electronic controllers. Sensor pockets are located in the most appropriate level for heat distribution in the cylinder. Sensor holders must be used and supplied by the electronic control unit supplier. The holders attach the sensor to the surface which prevents the sensors from falling down from the pocket. Make sure that probes are pushed all the way into the sensor tubes. Use a thermal paste. Secure the probe cable Locate sensors above the electrical elements when required © GreenGlo Limited 15 Version 07/2011