Download USER MANUAL INSTALLATION INSTRUCTIONS

Transcript
SENSORS CONNECTION
Sensors sense the temperatures when the cylinder is connected to heating
applications, and transfer the reading to the controllers, such as 3 way valve,
pumps and other electronic controllers.
Sensor pockets are located in the most appropriate level for heat distribution
in the cylinder. Sensor holders must be used and supplied by the electronic
control unit supplier. The holders attach the sensor to the surface which
prevents the sensors from falling down from the pocket.
Make sure that probes are pushed all the way into the sensor tubes.
Use a thermal paste.
Secure the probe cable
Locate sensors above the electrical elements when required
© GreenGlo Limited
15
Version 07/2011