Download TraumaCad User`s Guide

Measuring the Anatomy
2 Click to select the first tool. The tool appears on the image.
3 Hover over the illustration again to select the second tool. Both tools now appear
on the image, as shown below:
4
Zoom in the image to better see where the lines intersect.
The CORA and the osteotomy lines are indicated at the intersection between the
tools and it shows its bisectoral angle, which is 16° in this example. Both lines
appear on top of each other by default.
You can move the osteotomy line to where you plan to perform the osteotomy. By
default, it is positioned on the CORA.
CORA Line
Osteotomy Line
143