Download Title Page: User Manual

Options
7 - 57
Since the boom is a lifting device, be sure to check
the installation work:
1. Swing the boom manually -- and carefully -- to be sure it
moves freely.
2. Check all bolts for tightness.
3. Check the jib-boom wheel located at the top-front of the
cabinet above the door, to be sure that the shaft pin is actually
all the way through the wheel and held in place by the cotter
pin.
10.3.
Operations
WARNING! Be sure you have anchored the washer to the
floor BEFORE using the Jib Crane! DO NOT OPERATE the Jib
Crane if you have not anchored the washer to the floor -- the
washer could tip over and severely injure or kill the operator!
WARNING! Be sure the washer reservoir is filled to capacity
with solution BEFORE using the Jib Crane! DO NOT
OPERATE the Jib Crane if you have not filled the reservoir to
capacity with solution -- the washer could tip over and
severely injure or kill the operator!
To load a part using the Jib Crane, follow this procedure:
1. Hold the door position-lock handle up and push the door slowly away from
the cabinet past the first position lock (wider than a 90° angle from the
washer frame).
2. Move parts up to the front reservoir.
3. Attach the hoist to a part.
Standard Turntable Power Washer v. 4.0
The MART Corporation