Download Gamma Counter 1470 Wizard

4 Operation with internal RiaCalc WIZ
List This parameter lets you specify a list of controls and the number of patients between controls, e.g.
<start of assay>
LOW CONTROL
10 SAMPLES
MEDIUM CONTROL
10 SAMPLES
You can set up to 12 controls of one kind (e.g. LOW) in the list. The list should be long enough to allow the
evaluation of assays of varying lengths. If you want the assay to end with controls you must adjust the number of
patients in the list before each assay. If you edit this protocol in an external MultiCalc, you can put your own
codes in the list, but they cannot be stored.
Replicates Lets you specify a replicate value for controls (1..99), but no dilution. Alternatively, you can specify
that the patient replicate and dilution from the coding part be used.
4.5.11 Saved files
You can specify which types of files are required. These protocols are generated automatically during evaluation.
The choices are:
Input data
The data used for analysis. See Ria evaluation
from file
Standard curve
Standard curve
Trend data
Results for trend profiles
Control samples data
Concentration results of control samples
Results data
Results for output to an external computer. This
file is an ASCII file and its contents are selected
on the line Result file
The default for each file type is NO (not selected).
4.5.12 Display
This parameter line allows you to specify which results are to be displayed on the screen.
4.5.13 Printer
This allows you to specifiy the results for printout. The list of items which from which selection can be made are
the same as the list for the display but the actual selection for the printer may be different from that for the display.
4.5.14 Results files
This allows you to specify the contents of the Results (ASCII) file. The possibilities are the same as those for the
display but the actual selection for the results files may be different from that for the display.
See the section entitled "Output editing" for a description of the types of output options available and how to
select and edit them.
4.5.15 Coding
The program must know in which order RIA standards are loaded and what their nominal concentrations are. This
information is supplied in the CODING. Other special samples such as Blank and Reference can also be specified.
45