Download User Manual - Smart! Fertilizer Management Software

3
Injection Ratio – Smart! calculates the default value for the Injection Ratio (units of L/m or
%) according to the required concentration of fertilizers, their solubility, and the interactions
between fertilizers. This default value is the minimal Injection Ratio recommended. In case
3
the calculated minimal value is less than 0.5 L/m , Smart! sets the Injection Ratio to a
3
practical value of 0.5 L/m .
You may change the default Injection Ratio to fit the capacity of your fertilization system.
The quantities of fertilizers in the tank will be automatically adjusted accordingly. If you set the
Injection Ratio to a lower value than the minimal value recommended, an alert message will
be displayed, explaining the problem that might arise.
An alert icon
will be displayed in the tank as long as the problem is not corrected.
You can click the alert icon at any time to see the explanation of the problem.
78