Download Primus Programming Manual

Transcript
SIGNAL?
(signal?)
By selecting this function in a particular step, a signal will sound at the beginning of that step and a pause
will be automatically inserted. The time stops running and the display will read „PAUSE". This can be used if
you wish to add soap manually during the process. In the programme itself, the operator must then press
„START" to continue the process, the signal stops and the time starts running again. When all the above
questions have been answered, the display will read:
TIME - -,- MIN
(time - -,- min)
Now enter the required time for the step. The maximum time that can be set is 99,5 min. The tenths can be
entered only by 0 or 5. If the programmed process exceeds 100 minutes, the display will state the time in
full minutes up to a maximum 290 min. The programmed time does not include water heating, water inlet or
distribution the linen. The total time of a step will therefore be, for instance: water inlet time + water heating
time + the time programmed by you!
After programming the time, the display will ask:
TIME XX.X MIN
OK?
(time XX.X min, OK?)
If the programmed time is correct, press „YES". If you programmed a wrong time, press „NO". If you press
„YES", the display will read:
VERIFY?
(verify?)
If you press „NO", continue from „NEXT STEP?" If you press „YES?", the display will show all programmed
functions for this step gradually. This enables you to check all programmed functions again. When the
checking has finished, the display changes to:
NEXT STEP?
(next step?)
If you wish to correct this step, press „NO" and after the next question „END?" press „NO" again. Then you
can program this entire step again. If you press „YES", the display will show (for a few seconds) a number
of the next step, and you can start to program the step from the question „WASH?" By this way, several
steps can be created which together make up a washing process.
TO FINISH THE PROGRAMMING, YOU CAN PRESS „YES" ON THE QUESTION „END?" (SEE
CHAPTER 5.11.)
20
PROGRAMMING MANUAL – PREWASH
503 838 PUB DATE 04/99