Download User Manual - ADI Engineering

ADI Engineering: The Open IP ODM
3 INSTALLING FEDORA LINUX (REFERENCE ONLY)
NOTE: The following sections describe installation of Fedora Linux to a removable mSATA card. The same
procedure can also be used to overwrite the existing Fedora Linux installation on the onboard eMMC flash. To
use this procedure for the eMMC flash, do not insert a mSATA card and make sure to select the eMMC as the
Install Destination in section 3.2
3.1 Create installation DVD
The Fedora 19 installation guide can be found at http://docs.fedoraproject.org/enUS/Fedora/19/html/Installation_Guide/index.html. The following sections describe how to create the
installation DVD using a Windows PC.
3.1.1
Download the Fedora 19 x86_64 DVD ISO image
Note: In this section, be sure to download the “full” DVD ISO installation image (3-5GB). Do not download the
smaller “live” DVD ISO installation image (< 1GB).
Note: Download times can be several hours, depending on internet connection bandwidth, so plan accordingly.
1. Navigate to
http://download.fedoraproject.org/pub/fedora/linux/releases/19/Fedora/x86_64/iso/Fedora-19x86_64-DVD.iso.
2. Choose the option to save ISO image to local PC.
3. Download the ISO image to local PC hard drive. This image will be approximately 4GB.
3.1.2
Download ISO DVD burner software
1. Download the freeware Active ISO DVD burner software at http://www.ntfs.com/iso_burner_free.htm.
2. Install software to local PC hard drive.
Rangeley RCC-DFF Platform User Manual (45700-0006) page 21 of 36