Download User Manual

GL-VP-62xx User Manual
Firmware Upgrade
and Provisioning:
Default method is HTTP. Firmware upgrade may take up to 10
minutes depending on network environment.
Do not interrupt the firmware upgrading process.
SUPER CONFIGURATION PAGE DEFINITIONS
Setting Options
Meaning
NTP Server
This parameter defines the URI or IP address of the NTP
server which is used by the GL-VP-62XX to display the
current date/time.
Lock Keypad Update
If this parameter is set to “Yes”, the configuration update via
keypad is disabled.
Disable Voice Prompt
Syslog Server
Syslog Level
Default is No
The IP address or URL of System log server. This
feature is especially useful for the ITSP (Internet
Telephone Service Provider)
Select the GL-VP-62XX to report the log level. Default is
NONE. The level is one of DEBUG, INFO, WARNING or
ERROR. Syslog messages are sent based on the
following events:
1.
2.
product model/version on boot up (INFO level)
NAT related info (INFO level)
3.
4.
sent or received SIP message (DEBUG level)
SIP message summary (INFO level)
5.
6.
inbound and outbound calls (INFO level)
registration status change (INFO level)
7.
8.
negotiated codec (INFO level)
Ethernet link up (INFO level)
9.
SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
Download
Configuration
Device User can download configuration from the web page and
Copyright © 2009-2011 GigaLink
save to configuration file.
Page 21 of 46