Download User`s Manual

Transcript
Adapter Box
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is
used to connect external input / output devices. The pin definitions
are described below.
Pin No.
Name
4
GND
3
DI
Function
Ground
Description
This is a signal ground use for
DI and DO.
Digital
Connect to GND to activate or
Input
deactivate by software setting.
With a maximum load of 1A
and maximum voltage of 60V
DV,
this
output
has
an
open-collector NPN Darlington
2
DO
Digital
Output
transistor with the emitter to
the GND pin.
If used with an external relay, a
diode must be connected in
parallel with the load, for
protection
against
voltage
transients.
1
12V
Power
12VDC ± 10%, max. 0.4A
10