Download First steps UCCNC

-
3.1
Work-piece material, such as plywood, with a thickness of 3 mm (1/8 inch) and a size of approx. 200 mm
x 200 mm (6 inch x 6 inch)
CLAMPING OF THE WORK-PIECE MATERIAL
First you place the offer worktop on the machine table, secondly the work-piece material. Attach the two plates
with the accompanying retainers from the STEPCRAFT to the machine table. The screws need to be tightened by
hand only:
3.2
IMPORTING THE PATTERN
Open the pattern file with the “Load File” button in the main screen. Navigate to the /Examples/02-Milling directory
of the UCCNC CD and open the file Stepcraft-logo.nc.
11