Download 1PXL Strip/Cove Light XR CW/WW/DW user manual
Transcript
2 colors PANTONE 7 C PANTONE 400 M USER MANUAL 1PXL COVE LIGHT XR CW/WW/DW 1PXL STRIP CW/WW/DW Please check for the latest updates and changes on the TRAXON website. © 2008 TRAXON TECHNOLOGIES ALL RIGHTS RESERVED. WWW.TRAXONTECHNOLOGIES.COM H O N G K O N G N E W Y O R K P A R I S T O K Y O F R A N K F U R T B I R M I N G H A M R O T T E R D A M Version 1.1 CONTENTS 1. INTRODUCTION .................................................................1 2. PACKING CONTENTS ........................................................2 3. SAFETY AND OPERATION .................................................3 4. MOUNTING ........................................................................3 4.1 COVE LIGHT XR ............................................................3 4.2 STRIP ............................................................................5 5. SYSTEM CONFIGURATION...................................................5 5.1 SETTING AUTO-ADDRESSING .....................................5 5.2 TX CONNECT SYSTEM ................................................6 5.4 CONNECTING BETWEEN FIXTURES ............................7 5.5 LED CONTROL ............................................................7 5.6 SYSTEM CONNECTION ...............................................7 6. CARE AND MAINTENANCE ................................................9 7. TECHNICAL SPECIFICATION .............................................9 8. WARRANTY STATEMENT .................................................10 1 colors PANTONE BLACK M 2. PACKING CONTENTS FOR YOUR OWN SAFETY AND THAT OF THE PRODUCT, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE BEGINNING SETUP AND INSTALLATION! 1PXL COVE LIGHT XR 1. INTRODUCTION 1PXL COVE LIGHT XR CW (MB.CL.5060100) 1PXL COVE LIGHT XR WW (MB.CL.5070100) 1PXL COVE LIGHT XR DW (MB.CL.5080100) 1 x Hex Key 1PXL STRIP CW (MB.ST.5060000) 1PXL STRIP WW (MB.ST.5070000) 1PXL STRIP SW (MB.ST.5080000) 1 x 1PXL Cove Light XR The Traxon™ 1PXL Cove Light XR CW/WW/DW and 1PXL Strip CW/WW/DW features 12 or 24 ultra bright white SMD LEDs on a 24.5mm/0.96” pitch. The low-profile Cove Light XR, with a 180º adjustable base mount is an ideal solution as a self-housed unit for any alcoves and recesses. The Strip is an ideal option for full flexibility on mounting on any surfaces. The Cove/Strip is controlled by 3-channel DMX and can be daisy chained with the Traxon TX Connect™ system. 1 x TX Connect Smart Interconnection Cable (8cm/3.15”) 2 x Mounting Screws 1PXL STRIP 2 x Nylon Spacers 1PXL COVE LIGHT XR CW/WW/DW (Cold White / Warm White / Dynamic White™) 172.80 [6.80] • 180° Rotation on Base mount • DMX Control 16.80 [0.66] 180° 35.00 [1.38] • 360° Rotation on Free-Mount 44.70 [1.76] • SMART CHIP™ Technology 27.40 [1.08] • TX Connect™ System 35.00 [1.38] 295.00 [11.61] 33.65 [1.32] • 12/24 Ultra Bright White SMD LEDs • Auto-Addressing ON/OFF 54.80 [2.16] • Indoor Applications • TX Connect™ System 288.00 [11.34] 7.18 [0.28] • 12/24 Ultra Bright White SMD LEDs 2.00 [0.09] 1PXL STRIP CW/WW/DW (Cold White / Warm White / Dynamic White™) • SMART CHIP™ Technology • Auto-Addressing ON/OFF • Indoor Applications 1 24.50 [0.96] Ø4.80 [0.19] [2x] 1 x TX Connect Smart Interconnection Cable (8cm/3.15”) 2 x Mounting Screws 3. SAFETY AND OPERATION CAUTION – UNPLUG THE POWER SUPPLY FROM THE MAINS POWER BEFORE CONNECTING ANY CABLES AS THIS CAN DAMAGE THE PRODUCTS. CAUTION – AVOID LOOKING DIRECTLY INTO THE LED LIGHT SOURCE AT CLOSE RANGE FOR YOUR OWN SAFETY. 1.60 [0.06] ANY PERSONS INSTALLING THIS PRODUCT SHOULD COMPLY WITH LOCAL 9.25 [0.36] STANDARDS AND REGULATIONS AND MUST BE QUALIFIED FOR THE 142.50 [5.61] 71.25 [2.81] 27.00 [1.06] • DMX Control 1 x 1PXL Strip HANDLING OF ELECTRICAL EQUIPMENT. 2 1 colors PANTONE BLACK M This product is designed for indoor use only • USING BASEPLATE MOUNT An ambient operating temperature range of 0°C to 40°C (32°F to 104°F) must be adhered to at all times If the fixture has been subjected to drastic temperature variances, e.g. following transportation, do not connect the fixture until it has reached room temperature, as internal condensation build-up may damage the fixtures' electronics. When installing the fixtures and system power supplies in the chosen locations, please ensure that they will not be exposed to moisture, extreme heat or direct sunlight and that it is in a dirt and dust free environment keeping the fixtures and system power supplies within their operating boundaries. FIG 2 Use the screws provided to mount the baseplate firmly to a flat surface and then push the fixture onto the baseplate (FIG 1). Rotate the fixture to the desired position and lock using the hex MOUNT BASE USING SCREWS AND PUSH UNIT ONTO THE BASE key (FIG 2 & 3). Do not over-tighten as this can damage the fixture casing. FIG 4 FIG 3 Please study all functions in this User Manual throughly and check the latest Technical Specifications Sheets available from our website [www.traxontechnologies.com] before setup. ADJUST TO DESIRED ANGLE 180° LOCK UNIT USING THE PROVIDED HEX KEY DO NOT OVER-TIGHTEN 4. MOUNTING Plan your installation before mounting the Cove Light XR or Strip. The following should be • FREE-MOUNTING considered for a successful installation. Mounting multiple Cove Lights in • Installation distances and choose appropriate cable lengths. a straight run can be achieved • The number of fixtures and choose appropriate power sources. using a round stainless steel rod • DMX controller to be used to control the fixtures. (not provided). Push the fixture • Auto-addressing ON or OFF on each fixture. (Refer to 5. SYSTEM CONFIGURATION.) FIG 1 The Cove Light XR can be mounted 156.00 [6.14] 3.50 [0.14] 4.1 COVE LIGHT XR FIG 5 PUSH THE UNIT ONTO THE ROD onto the rod, rotate the fixture to +0.01 -0.01 the desired position and lock Ø0.25 using the hex key (FIG 5, 6, & 7). +0.15 Ø6.35 -0.35 Do not over-tighten as this can 140.00 [5.51] damage the fixture casing. using the provided baseplate FIG 6 FIG 7 (dimensions shown in FIG. 1) or mounted in straight runs on a round 20.00 [0.79] Ø7.00 [0.28] stainless steel rod (not supplied). Ø3.50 [0.14] 3 40.00 [1.57] Baseplate dimensions in mm [in] (Bottom view) LOCK UNIT USING THE PROVIDED HEX KEY DO NOT OVER-TIGHTEN ADJUST TO DESIRED ANGLE 4 1 colors PANTONE BLACK M 4.2 STRIP • Auto-addressing OFF: Next fixture uses the same DMX data as the existing fixture. FIG 8 To mount the Strip, affix the nylon 142 NYLON SPACER spacers into the mounting holes on .60m m [5 • Auto-addressing ON: Next fixture uses data from the next 3 DMX channels .61” ] the bottom side of the Strip, then use the screws to mount to a flat surface. 5.2 TX CONNECT SYSTEM SCREW Select the desired position and fasten The Traxon TX Connect System is a interconnection system that combines power and DMX data on a single connector cable so that only one connection is required between light fixtures. the screws in place (FIG 8). Multiple strips can be mounted in line as shown in FIG 9. The Cove Light XR and Strip use the TX Connect System for all interconnections. FIG 12 shows some components for the TX Connect System. FIG 9 142.50 [5.61] 151.50 [5.96] 142.50 [5.61] 151.50 [5.96] FIG 12: TX Connect System Components 6.00 [0.24] TX Connect Data Cable Light-Drive Jog DW 5. SYSTEM CONFIGURATION Part No.: DI.IC.0020000 0.2m DI.IC.0100000 1m DI.IC.0300000 3m Part No.: DI.IC.0500000 5m SC.JD.5080000 (black) SC.JD.5080100 (white) DI.IC.1000000 10m DI.IC.2000000 20m FIG 10 FIG 11 AUTO-ADDRESSING OFF COVE LIGHT XR AC IN By default, the factory setting for the auto-addressing feature is OFF. The DIP switch on the back of the fixture sets the auto-addressing feature (see FIG 10 and FIG 11). Auto-addressing sets the DMX channel for the next fixture in the chain. DC OUT 5.1 SETTING AUTO-ADDRESSING (DEFAULT OFF) TX Connect Smart Interconnection Cable Part No.: TI.IC.0008000 0.08m LED Engine Smart 100W Indoor TI.IC.0030000 0.3m Part No.: PS.IA.0010000 TI.IC.0060000 0.6m STRIP AUTO-ADDRESSING OFF TX Connect Smart Extension Cable 5 AUTO-ADDRESSING ON BOTTOM VIEW AUTO-ADDRESSING ON BOTTOM VIEW TX Connect Smart Power/Data Injector Box TX Connect Smart Data Extractor Box Part No.: TI.ZI.0000100 Part No.: TI.DO.0000100 Part No.: TI.EC.0050000 0.5m TI.EC.0100000 1m TI.EC.0300000 3m TI.EC.0500000 5m TI.EC.1000000 10m 6 7 — 0-255 — WW FIXTURE 0-255 — — DW FIXTURE 0-255 0-255 — WHERE 0 = MIN. INTENSITY, 255 = MAX. INTENSITY 5.5 SYSTEM CONNECTION The fixtures are wired together in a daisy chain using the TX Connect Smart system. FIG 14 shows a wiring example. CONTROLLER CW FIXTURE 512 DMX Channels per output CHANNEL 3 (Reserved) LED Engine Smart 100W Indoor (PS.IA.0010000) TX Connect Smart Interconnection Cable (TI.IC.xxxxxxx) TX Connect Smart Power/Data Injector Box (TI.ZI.0000100) 1PXL Strip CW (MB.ST.5060000) 1PXL Strip WW (MB.ST.5070000) 1PXL Strip DW (MB.ST.5080000) TX Connect Smart Data Extractor Box (TI.DO.0000100) POWER SUPPLY to last FIXTURE in chain. C to D: 30 meters CONTROLLER to first FIXTURE. A to B: 100 meters CABLING LENGTHS PER CONTROLLER OUTPUT (512 DMX CHANNELS). 170 1PXL FIXTURE CAN BE DAISY CHAINED PER LED ENGINE SMART 100W INDOOR. 9 1PXL FIXTURE DW CAN BE DAISY CHAINED CAUTION: PLEASE ENSURE THAT THE POWER IS SWITCHED OFF WHEN THE DATA CABLES ARE BEING CONNECTED. FAILURE TO DO SO WILL RESULT IN DAMAGE TO THE PRODUCTS AND VOID THE PRODUCT WARRANTY. TX Connect Data Cable (DI.IC.xxxxxxx) AC Power Cord (PS.AC.xxxxxxx) C 5.4 LED CONTROL PoE power from power supply CHANNEL 2 POWER SUPPLY CHANNEL 1 A DMX CHANNEL ALLOCATION FOR LED CONTROL Light-Drive JOG DW (SC.JD.5080000) The LEDs on the Cove Light XR CW/WW/DW and Strip CW/WW/DW are controlled by DMX. Each fixture is allocated with 3 DMX channels that control the brightness for CW/WW (cold white/warm white) fixtures; and the brightness and color temperature for DW (dynamic white) fixtures. Refer to the table below. TX Connect Smart Interconnection Cable (TI.IC.xxxxxxx) D TX CONNECT SMART INTERCONNECTION CABLE B NEXT FIXTURE TX Connect Data Cable (DI.IC.xxxxxxx) FIG 13 1PXL Cove Light XR CW (MB.CL.5060100) 1PXL Cove Light XR WW (MB.CL.5070100) 1PXL Cove Light XR DW (MB.CL.5080100) Use the TX Connect Smart Interconnection Cable to connect between fixtures. For longer distances, either use a longer Interconnection Cable or use the existing Interconnection Cable with a TX Connect Smart Extension Cable. PER LED ENGINE SMART 100W INDOOR. 5.3 CONNECTING BETWEEN FIXTURES 18 1PXL FIXTURE CW/WW CAN BE DAISY CHAINED 1 colors PANTONE BLACK M FIG 14: 1PXL Cove Light XR CW/WW/DW / 1PXL Strip XR CW/WW/DW System Connection Example 8 1 colors PANTONE BLACK M 6. CARE AND MAINTENANCE 7. TECHNICAL SPECIFICATION 1PXL COVE LIGHT XR CW/WW/DW / 1PXL STRIP CW/WW/DW Traxon™ products are of superior design and quality and should be treated with care. The recommendations below will help fulfill and warranty obligations and gain good use and longevity from the products. - Do not attempt or use the product(s) until you read and understand the installation instructions. Failure to adhere to these instructions could result in serious injury or property damage. - Do not use product(s) if cables are damaged. Color Temperature: Light Source: Source Life: Beam Angle: Power Input: Power Consumption: Operating Temperature: 7000 K (CW), 3500 K (WW), 3500-7000 K (DW) 12 (CW/WW) or 24 (DW) Ultra Bright White SMD LED 50,000 hours under normal operating conditions 120° 24V DC 5W max. (CW/WW), 10W max. (DW) 0°C to 40°C (32°F to 104°F) - Do not use product(s) when wet or in wet area. Moisture can cause electric shock and damage to product(s). - Do not use product(s) in dirty and dusty environment. - Do not use product(s) in extreme heat environment. Ensure there is sufficient airflow and use cool air circulation if required. - Do not drop, knock, or shake product(s). Rough handling can damage the electronics and void the warranty. - Do not use harsh chemicals, cleaning solvents, or strong detergents to clean products. Wipe with a damp cloth on housings and a dry cloth on electronics to remove dirt or dust. - Do not use product(s) outdoors. - Do not attempt to service or repair the product(s) unless done by an authorized service personnel. Contact your the local Traxon™ office or distributor for details. CAUTION To reduce the risk, electric shock, or injury to persons: - Use only insulated staples or plastic ties to secure cords. - Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall. - Not intended for recessed installation in ceilings or soffits. As with all electronic devices, LED output degrades over time - a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degradation is a complex function of many factors such as operating efficiency, duration of continuous operation, and operating conditions (e.g. ambient temperature). Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product. LED manufacturers “sort” LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. - Not intended for surface installation inside built-in furnishings such as kitchen cabinets, china cabinets, or trophy cases. - The National Electrical Code (NEC) does not permit cords to be concealed where damage to insulation may go unnoticed. To prevent fire danger, do not run cord behind walls, ceilings, soffits, or cabinets where it may be inaccessible for examination. Cords should be visually examined periodically and immediately replaced when any damage is noted. If the product is not working correctly, please contact your nearest authorized service centre or Traxon Technologies office for assistance. 9 8. WARRANTY STATEMENT Traxon warrants its Products against material or workmanship defects for a period of two (2) years from date of purchase, provided that the purchased items are used under the conditions stated in this user manual. Please refer to the Product Warranty section under www.traxontechnologies.com/terms for warranty terms and conditions. 10