Download 633 - User Guide and Technical Information

633 User Guide and Technical Information
4. To toggle the assignment of a source, turn the Headphone Encoder to highlight the source
and press the Headphone Encoder to toggle the assignment. Editing occurs in real time and
source adjustments will be heard in the monitors.
5. (Optional) Slide the Slate/Tone switch left to toggle M/S decoding for the preset. M/S decoding will decode the entire preset and should not be used if inputs are already linked M/S.
6. (Optional) Slide the Slate/Tone switch right to toggle mono summing of the preset. Mono
summing will ignore left and right assignment and put all active sources in both channels of
the preset.
7. (Optional) To name a Headphone Preset, slide the RTN/FAV switch left and enter the name
using the on-screen keyboard or attached USB keyboard.
8. (Optional) Slide the RTN / FAV Switch right to toggle this preset’s Favorite status (See “Favorite Headphone Source”, page 24). Press the Meters Button, Stop Button, or Select Encoder to
exit the Preset Editing Screen.
Favorite Headphone Source
Any single Headphone Source can be set as the “favorite”. The Favorite Headphone Source can be
recalled quickly by sliding the RTN/FAV switch right from the Main Screen.
Headphone Monitoring
To set a Default Headphone Source as the Favorite Headphone Source:
1. From the Main Screen, press the Headphone Encoder to access the Headphone Sources selection menu.
2. Highlight one of the default Headphone Sources (LR ST, LR Mono, L Mono, R Mono,
LR M/S ST, or X1X2)
3. Slide the Slate/Tone switch left or right. The background of the SET FAV text on the LCD will
become blue to indicate that the highlighted Headphone Source is now the Favorite Headphone Source.
Slide the RTN/FAV right in the Preset Editing Screen to set a Custom Headphone Preset as favorite.
(See “Custom Headphone Presets”, page 23).
PFL (Input Solo)
When any input’s PFL is activated, the currently selected Headphone Source is replaced with the
signal of the selected input (This signal will be pre- or post-fader depending on the input’s setting
in Setup Menu option INPUTS > Input to ISO Routing). The selected input’s Activity LED flashes
yellow when the input’s PFL is engaged. Additionally, the PFL number will appear in the lower right
corner of the Main Screen.
When Setup Menu option INPUTS > PFL Toggle Mode is set to 6ch (default), entering the Input Settings Screen will also engage PFL for that input. Hold the Select Encoder while sliding Input Select
Switch to display the Input Settings Screen without engaging PFL on the input.
When Setup Menu option INPUTS > PFL Toggle Mode is set to 3ch, the Select Encoder and Input
Select Switch are used together to access inputs 4, 5, and 6 PFL or Input Settings Screens. (See “PFL
Toggle Mode”, page 25)
PFL monitoring only affects the headphone monitor; It does not affect audio sent to the outputs or internal recorder.
24
v. 1.04
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.