Download User Manual

Transcript
Section 3: Configuration
HTTPS
This page allows you to install and activate an HTTPS certificate for
secure access to your camera. After making any changes, click the
Save Settings button to save your changes.
Enable Enable the HTTPS service.
HTTPS Secure
Connection:
Create Choose the way the certificate should be created.
Certificate Three options are available:
Method:
Create a self-signed certificate automatically
Create a self-signed certificate manually
Create a certificate request and install
Status: Displays the status of the certificate.
Note: The certificate cannot be removed while the
HTTPS is still enabled. To remove the certificate,
you must first uncheck Enable HTTPS secure
connection.
D-Link DCS-6314 User Manual
62