1
Download Function Reference Manual - DSP Development Corporation
Transcript
Format:
SETAORIX(Window, orient)
SETAORIY(Window, orient)
Window - Optional. Window reference. Defaults to the current Window.
orient
- An integer value; 1: Horizontal, 2: Vertical. Defaults to 1.
Example:
W1: gsin(100,.01);setvunits("Volts")
W2: gcos(100,.01);setvunits("Amps")
W3: w1;staggery(0);staggerx(0);Scales(2);
sety(-4,1.5);spany(-1,1);overlay(w2,red);
focus(2);staggery(0);staggerx(0);scales(13);
sety(-1.5,4);spany(-1,1);focus(1);setaoriy(1);
focus(2);setaoriy(2)
Window 3 contains the 2 overlayed curves with flush scales and different axis label
orientations. The axis labels for the sine wave are horizontal, while those for the cosine
wave are vertical.
Remarks:
SETAORIX and SETAORIY apply to the scales associated with the current focus of the
specified Window. By setting the orientation, the label will be drawn horizontally or
vertically, i.e. succeeding characters in a label string will be drawn below or above
(vertical) or to the right or left (horizontal) of preceding characters. If the axis label is
vertically oriented, then its rotation is defined to be the vertical label default rotation for
its label type and axis.
See Also:
FOCUS
OVERLAY
SCALES
SETAROTX, SETAROTY
SETAVDEFX, SETAVDEFY
SETTORIX, SETTORIY
SETTROTX, SETTROTY
SETTVDEFX, SETTVDEFY
SETXTIC
SETYTIC
SETAROTX, SETAROTY
Purpose:
Sets the rotation for axis labels on x- and y-axis.
656
