Download "user manual"

1
Connect the Earphone Mic to the Mova.
• Slide the cover of the earphone mic jack and insert the plug of the Earphone Mic into the jack.
2
Press the switch on the Earphone Mic for over a second.
The beep sounds and the call is connected to the recipient. Talk when the recipient answers the
call.
3
Press the switch on the Earphone Mic for over a second to hang up.
The beep sounds and the call is disconnected.
Using the Switch to Receive a Call
1
When receiving a call, press the switch on the Earphone Mic for over a second.
The beep sounds and the call is connected.
2
Press the switch on the Earphone Mic for over a second to hang up.
The beep sounds and the call is disconnected.
Other Useful Functions
● If the memory number “699” of the Phonebook is saved as Secret, pressing the switch has no effect on placing
a call unless the Secret mode is set to [Display ON].
Switched earphone mic/Auto answer
You can set to automatically answer a call when the Switched Earphone Mic, etc. is
connected.
● Do not wind the cord of the Earphone Mic around the Mova.
● Placing the cord of the Earphone Mic close to the antenna may cause noise.
Receiving a Call Automatically with Earphone Mic
1
From the Menu, select [Settings] → [Call] → [Auto answer] and press
.
Ａｕｔｏ ａｎｓｗｅｒ 0ＦＦ
Ｓｅｔ Ａｆｔｅｒ ０５ｓｅｃ．
（０１−２９）
2
3
Select [ON]/[OFF] of the Auto answer at [Set].
Enter the time before receiving a call automatically at [After].
Enter from 01 to 29 seconds.
4
Press
(cmplt).
The Auto answer is set.
● When the Auto answer is set together with the Record message, Voice Mail Service, or Call Forwarding Service,
and if you want to make the Auto answer higher priority, set a shorter time for the Auto answer than the interval
before playing back the answering message or the ring tone duration of these functions or services. When the
interval set for the Record message is same as the time you set for the Auto answer, the interval set for the Auto
answer has priority.
164