Download INSTALLATION MANUAL

SYSTEM TESTS
SENSOR TEST
FIND IT
Sensor Test
The panel can test it’s connection and communication to the individual
security sensors. Before running this test there must be at least one security
sensor paired with the system.
Sensors connected to the panel will appear on the screen.
Tamper or open a sensor to test. (refer to individual sensor
documentation for instructions if needed.)
Excellent
3+ RF packets received
Pass
1 - 2 RF packets received
The panel will audibly report and display test results for the
No Signal
sensor being tested.
Green (pass) or Red (fail).
No RF packets received
Note: For UL/cUL , perform a placement test first for all wireless initiating
devices. The acceptable result shall be "Excellent".
Settings
System
Tests
Sensor Test
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page 69 of 114
© Last updated 4/29/15 All rights reserved