Download GT14 User`s Manual

Use of the protective cover for oil improves waterproof property, oil resistance, and chemical resistance of the GOT.
8.5.1
Applicable protective cover for oil
2
The following protective cover for oil is applicable for GT14.
Model name
Protective cover for oil
GT05-50PCO
8.5.2
Description
SYSTEM
CONFIGURATION
Product name
OVERVIEW
1
8.5 Protective Cover for Oil
5.7" protective cover for oil
Installing procedure
A protective film is attached on the display area when the GOT is shipped. Make sure to remove the protective film
before attaching the protective cover for oil.
For attaching the protective cover for oil to the GOT already mounted on the control panel, follow the procedures as
below.
• Remove the GOT from the control panel.
Make sure to externally shut off all phases of the power supply and remove all cables from the GOT in advance.
• Clean dirt off surfaces of the GOT and control panel.
GOT
1.
Position the POWER LED frame of the cover to the
POWER LED on the GOT front face, and the direction
of the cover is decided.
Protective Cover For oil
2.
One corner of the cover is pulled outside, and it hangs
it on the corner of the front panel of GOT.
5
6
INSTALLATION
Please do not pull the oil cover
more than the necessity,
and do not bend it extremely.
The seat part and the rubber part
in the display part might flake off.
4
PARTS NAME
Before attaching protective cover for oil
UL, cUL
STANDARDS AND
EMC DIRECTIVE
POINT
SPECIFICATIONS
3
Protective Cover For oil
7
The corner is hung.
WIRING
GOT
OPTION
8
8. OPTION
8.5 Protective Cover for Oil
8-7