Download Movicon CE Reference Guide

I N S T A L L A T I O N
This will uninstall Movicon CE.
4.1. MS ActiveSync and Windows Mobile
Device Center
The Microsoft ActiveSync and Windows Mobile Device
Center programs have been provided for free in the
Movicon CdRom and are used for connecting the
Desktop PC to the target device in which WinCE has
been installed.
By using the "MS ActiveSync" (for Windows XP) and "Windows Mobile Device Center" (for Windows
Vista/7) applications, you can create a connection between the desktop PC, where the project is
developed, and the target device with WinCE.
Before carrying out any connections ensure that the "Allow connection with desktop computer when
device is attached" function on the target PC has been activated. The function's status can be viewed
by launching the Communication program icon from the Windows CE control panel. Also double
check and make sure that the "MS ActiveSync" or "Windows Mobile Device Center" application
settings have been done correctly in the desktop PC: select the "Connection Settings" items from the
application's File menu and enable the connection type, serial or USB, then select any necessary
parameters.
The in order to establish the connection you need to launch the RepLog.exe file, located in the
Windows system folder, from the target PC. The "MS ActiveSync" or "Windows Mobile Device Center"
program, on the desktop PC, will automatically establish a connection, otherwise you can force it by
launching the "Get Connected..." command from the ActiveSync program's File menu. When opting
for the USB connection you will need to executed the "Repllog.exe" file on the WinCE device.
The desktop and target PC connection allows Movicon projects to be exported directly in Windows
CE, new program installations on the target PC or to explore the disk's contents. The connection
status can be viewed in the Windows application status bar where the status type is indicated the
color of the "MS ActiveSync" or "Windows Mobile Device Center" icon: green means the connection is
active and grey means it is disconnected.
Each time the cable is disconnected, you need to repeat the procedure described above to
reconnect.
21