Download Camco D-Power User Manual

D-POWER
2 FACILITIES
SERIES
2.3 Factory Settings
D-POWER amplifiers are delivered with the following factory settings
Front panel:
Rear panel:
7
8
Volume Control Channel A Volume Control Channel B
The volume is set to minimum.
The volume is set to minimum.
11
On/Off Switch
The amplifier is switched off.
12
13
14
15
16
17
Input Ground Lift High Pass Filter B
Mode Selector
Gain Selector
High Pass Filter A
Clip Limiter
Grounded
Off
Stereo
32 dB
Off
Off
Make sure that the switches are set to the configuration needed for each
particular application.
For more detailed information, see sections 3.5, 3.6, 3.7 and 4.1.
P. 10
USER MANUAL
D - P O W E R SERIES