Download Experiment Manual

6. Simulate
Go to IP and ARP configuration and disable static ARP.
Simulation Time - 100 Sec
After completion of the experiment, “Save” the experiment for future analysis of results.
7. Configure the Network (Sample 3)
Follow all the steps as shown in Sample 1 and modify only the Wired Link properties as
shown below
Wired Link Properties: Right click on Wired Link  Properties and set the values.
Wired
Link 1
10
Wired
Link 2
10
Wired
Link 3
10
Wired
Link 4
10
Wired
Link 5
10
Wired
Link 6
10
Uplink BER
10
10-8
10
10-8
10
10-8
10
10-8
10
10-8
10
10-8
Downlink BER
10-8
10-8
10-8
10-8
10-8
10-8
Link Properties
Uplink Speed (Mbps)
Downlink Speed (Mbps)
8. Simulate
Go to IP and ARP configuration and disable static ARP.
Simulation Time - 100 Sec
After completion of the experiment, “Save” the experiment for future analysis of results.
9. Configure the Network (Sample 4)
Follow all the steps as shown in Sample 1 and modify only the Wired Link properties as
shown below
Wired Link Properties: Right click on Wired Link  Properties and set the values.
Wired
Link 1
10
Wired
Link 2
10
Wired
Link 3
10
Wired
Link 4
10
Wired
Link 5
10
Wired
Link 6
10
Uplink BER
10
10-7
10
10-7
10
10-7
10
10-7
10
10-7
10
10-7
Downlink BER
10-7
10-7
10-7
10-7
10-7
10-7
Link Properties
Uplink Speed (Mbps)
Downlink Speed (Mbps)
62