Download HVA4321

8.1 Signal area
8.1
Signal area
Unless otherwise specified, the listed values are at no load (open-circuit in constant voltage mode and
short-circuit in constant current mode).
Internal signal source for DC bias
Output adjustment range
In constant voltage mode: Equivalent to the output voltage range
from 0 V to ±10 kV.
In constant current mode: Equivalent to the output current range
from 0 mA to ±10 mA.With 10 rotation potentiometer
Inversion function:
Available
Signal ON/OFF function
Available (ON/OFF with external signal is also available.)
Signal input for oscillator
Input voltage range
Input terminal
Input resistance
Gain adjustment range
Inversion function
Signal ON/OFF function
±10 Vpk
BNC
10 kΩ± 10 %
±3 % (Continuously variable with semi-fixed regulator)
Available
Available (ON/OFF with external signal is also available.)
Signal input for DC bias
Input voltage range
Input terminal
Input resistance
Signal ON/OFF function
Polarity
±10 Vpk
BNC
10 kΩ±10 %
Available (ON/OFF with external signal is also available.)
Same phase as the output
HVA4321
8-1