Download Air Gap Sensor AGS

Transcript
MIKROTREND
AGS Installation and user manual 141129
Contents
1. Overview ................................................................................... 3
2. Application................................................................................ 4
2.1. AGS selection table .......................................................................... 4
3. Technical specifications ......................................................... 6
4. Installation instructions ........................................................ 11
4.1.
4.2.
4.3.
4.4.
4.5.
4.6.
4.7.
4.8.
4.9.
4.10.
4.11.
4.12.
5.
6.
7.
8.
AGSC Signal Conditioner unit installation guide ............................ 11
Appropriate location for AGSC signal conditioner unit .................... 13
Grounding of AGSC signal conditioner unit .................................... 13
Power supply connection................................................................ 13
Calibration....................................................................................... 13
AGSP Sensor probe installation guide............................................ 13
Placing the sensor .......................................................................... 13
Preparing the stator surface............................................................ 14
Mounting the sensor ....................................................................... 14
True Air-Gap and offset ................................................................ 17
Cable installation .......................................................................... 18
Connection to AGSC conditioner unit ........................................... 19
Troubleshooting..................................................................... 20
Ordering information ............................................................. 21
Manufacturers Test and Calibration Report ........................ 22
Important notice ..................................................................... 23
2/23