Download Operation Manual

Itamar Medical Ltd.
2.3.3. Oximetry test
For the oximetry test make sure the sensor is attached to the finger. At the end of the test
the saturation and/or any error message will be displayed:
OXI TEST
SaO2=98%
22:50
Attach to finger
<-Back
Testing…
OXI TEST
22:50
SaO2=N/A
oxi=mod missing
Attach to finger
<-Back
Testing…
The possible oximetry error messages are:
• Oximetry error: module or sensor missing - connect oximetry module and
sensor.
• SaO2= Not Available (N/A) - attach sensor to finger.
The blood saturation is continuously updated, therefore wait for one minute or so for the
saturation to stabilize when testing.
<-Back we move to previous screen.
Watch-PAT200
15
Operation Manual