Download User`s Guide for Windows

Power light blinks twice
The print cartridge carrier might be stalled. Check your computer screen
for error messages.
1 Turn the All-In-One off.
2 Wait a few seconds, and then turn the All-In-One on.
Remove and reinstall the software
If the All-In-One is not functioning properly or if a communications error
message appears when you try to use your All-In-One, you may need to
remove it, and then reinstall the printer software.
1 From your desktop, click Start
Series
Programs Lexmark X6100
Uninstall Lexmark X6100 Series.
2 Follow the instructions on your screen to remove the All-In-One
software.
3 Restart your computer before reinstalling the All-In-One software.
4 Insert the CD, and then follow the instructions on your screen to
install the software.
More troubleshooting options
If the preceding solutions do not solve the problem you are having with
your All-In-One:
• Refer to the Lexmark Solution Center software for more
troubleshooting information:
1 Click Start
Programs Lexmark X6100 Series
Lexmark X6100 Series Solution Center.
2 Click the Troubleshooting tab on the left side of the screen.
• Go to http://support.lexmark.com/ for help.
103