1
Download 1 General Use - Basement
Transcript
User Manual BASEMENT
TUTORIALS
Fig. 22: Inflow hydrograph stored in the file Inflow_instationary.txt. Note that the points (...) are just
illustrative in order to show the first and last line of the file.
In the PARAMETER-block the total run time of the simulation is increased up to 80’000
seconds in order to capture the whole flood event:
PARAMETER
{
...
total_run_time = 80000
...
}
Last but not least the OUPUT-block has to be adjusted to the needs of the simulation. For
the unsteady simulation maxima values may be of interest.
U IV - 3.4-4
VAW ETH Zürich
Version 12/16/2010
